Characterization & Metrology
-
DM01 Leica INM 100 Optical Microscope
This microscope is a manual, high-performance optical microscope designed for the Semiconductor industry. It is equipped with a nominal CCD camera and a computer system to capture the images – top side illumination only. It is capable of magnifying to 2000x using an extra magnification lens in its body. The microscope has multiple modes of…
-
DM05 Leica INM 200 Optical Microscope
This is the new Leica INM 200 Optical Microscope system. It is newly designed as a universal inspection microscope, having both reflected and transmitted light imaging capability. In addition, it has extensive image processing software enabling the user to optimize the image, including the ability to greatly extend the depth of focus of high resolution…
-
DP03 Alessi 4-point Probe
The Alessi manual 4 point probe uses a Cascade C4S probe head with 1mm spacing between tungsten carbide probe tips. The metering is provided by a QuadTech LR2000 digital milliohmmeter.
-
DS01 TOHO FLX2320 Thin Film Stress Measurement
The FLX-2320 is a thin film stress machine. A laser scanner is used to measure the changes in the radius of curvature of the substrate caused by the deposition of a thin film on the wafer. This is accomplished by first measuring the wafer curvature before the film is deposited and then re-measuring the curvature…
-
DT05 Nanometrics Nanospec 6100 Thin Film Thickness Analyzer
The NanoSpec 6100 thin film thickness measurement system utilizes non-contact spectroscopic reflectometry to measure sites as small as 25 µm in diameter on reflecting substrates. The object measures film thicknesses in the range of 200 Å – 20 µm with the visible light source and 25 Å – 20 µm with the UV light source.…
-
Jandel Multiposition Wafer Probe
The Jandel multiposition wafer probe can measure either the resistance or sheet-resistance at several locations on wafers up to 6 inches in diameter.
-
Oxford Asylum Research Jupiter XR Atomic Force Microscope
A new AFM to replace the retired Veeco Dimension V SPM that was retired in July 2020. The Jupiter XR was released to our users for operation on August 10, 2020.
-
Rame-Hart Goniometer
This is a manual goniometer used for measuring the contact angle of a static drop of water on the surface of a solid sample. The contact angle gives the user an idea of how hydrophobic or hydrophillic a sample surface is, which may be very useful when attempting to optimize adhesion between two dissimilar materials.
-
Veeco Dektak VIII Profilometer
The Dektak 8 profilometer measures the vertical profile of developed or etched patterns by lightly dragging a sharp stylus across the surface and detecting its vertical movement. This allows users to determine resist thickness, etch depth, and general step height distances. Vertical sensitivity is in the fractions of an Angstrom (0.01 nano-meters). It uses a…
-
Woollam M2000D Ellipsometer
This tool is a spectroscopic ellipsometer that measures thickness, refractive index, and absorption properties of single thin films and multi-layer thin film stacks. Light with a known polarization is reflected off a sample at a known angle, the polarization will change based on the refractive index and the film thickness. The spectral range of the…
-
Zeiss SIGMA 500 VP Scanning Electron Microscope
This scanning electron microscope (SEM) is a multi-use tool that has many features. It is capable of imaging resolution of 1-2 nm, and provides acceleration voltages from 100 V to 30,000 V. It has an EDAX X-Ray spectrometer to determine elemental composition of a sample and can map the location of the elements over the…
Deposition
-
PD01/ PD02 Plasma-Therm 790 PECVD
PD01 is a Plasma-Therm 790 PECVD tool that is configured with 2% silane in helium to deposit high-quality silicon dioxide, silicon nitride, and amorphous silicon films at temperatures from 100 C to 300 C. The tool was donated to UTD in May 2004 by the Mykrolis Corporation. PD02 is also a Plasma-Therm 790 PECVD system…
-
PD03 Plasma-Therm Vision 310 PECVD
PD03 is a PlasmaTherm Vision 310 plasma enhanced chemical vapor deposition (PECVD) instrument in service since 2021. It deposits high-quality silicon oxide of uniform thickness across the whole sample platen at 300 degree C deposition temperature. It also supports silicon carbide films deposition using various custom recipes developed at UT Dallas.
-
TC02 Ultratech/Cambridge NanoTech Savannah 100 Atomic Layer Deposition
The Atomic Layer Deposition system deposits thin films of dielectrics such as hafnium oxide, silicon oxide, and aluminum oxide. The tool can be configured for titanium oxide upon user request. The tool can easily switch from water to ozone precursor. Users may request additional training on the ozone generator.
-
TC03 PICOSUN R-200 Advanced Plasma ALD
Coming soon.
-
TD03 SCS Parylene Deposition
The Parylene coater deposits parylene in thin films to serve as an insulating coating for organic semiconductors.
-
TL01 Tystar LPCVD Furnace
The Tystar Low-Pressure-Chemical-Vapor-Deposition (LPCVD) object consists of four horizontal sub-atmospheric furnace tubes that can process up to 6″ diameter silicon wafers. The furnaces are fully computer controlled and are configured to deposit doped and undoped polysilicon, silicon dioxide, and silicon nitride films. The object is capable of depositing films with wafer-to-wafer and within-wafer uniformity of…
Plasma Etch
-
March Asher
The March Asher, (PX-250), is a batch etch object designed for a multiplicity of plasma process applications. The electrodes and sample plates can be quickly rearranged to create direct plasma, reactive ion etch, and down stream plasma conditions for different applications. This system consists of three modules: a Reaction Chamber, a Process Controller Module and…
-
PE03 Plasma-Therm ICP-Metal Etch
The Plasma-Therm plasma ICP etcher is configured for etching metallic films using chlorine based chemistries. Presently, Cl2, BCl3, O2, and Ar are installed on the object. The tool is equipped with a vacuum load-lock to prevent potentially toxic etch by-products from venting to the Cleanroom during sample load and unload.
-
PE04 Plasma-Therm, Plasma Dielectric & Deep Silicon Etch
The PLASMA-THERM, formerly Oerlikon, plasma dielectric and DSE (Deep Silicon Etch) etcher is configured for etching films using fluorine based chemistries. Presently, SF6, CHF3, and C4F8 precursors are installed on the object. The object is equipped with a vacuum load-lock to prevent potentially toxic etch by-products from venting to the Cleanroom during sample load and…
-
PE05 Plasma-Therm III-V’s Etcher
The Plasma-Therm III-V’s etcher is configured for etching III-V’s compound semiconductors using chlorine and fluorine based chemistries. Presently, Cl2, BCl3, HBr, CHF3, SF6, CH4, O2, N2, H2, He, and Ar are installed on the tool. The tool is capable of sample heating up to 180 C and is equipped with an end-point detection and thickness…
-
PE06 DSE Etch
This is a plasma etch tool dedicated solely to deep silicon etch (DSE) processes. The tool has many process parameters (substrate temperature, ICP power, sample bias voltage, etc.) that can be tuned to improve user’s etch results.
-
Trion Sirius-T2 RIE Etcher
This is our new reactive ion etch (RIE) tool! The RIE creates a directional, high energy gas plasma to etch materials. It is capable of etching with argon, oxygen, CF4, and SF6 chemistries.
Lithography
-
CEE Spincoater
A Brewer Scientific system for coating silicon wafers with a controlled thickness of photoresist. A precision vented hotplate, built into the chassis, allows controlled post baking of the resist.
-
Cole Parmer Ovens
The Cole Parmer digital ovens are used for SU-8 thermal bake processing typically for MEMS processes.
-
CPK Chrome Etch
The CPK Acid and Base processor can spin-spray acids, bases, water, and nitrogen onto substrates in a programmable process with variable spin speeds and chemical spray times. Several programs are stored to enable chrome etching of photomasks, and development of photoresists.
-
CPK Spin Processor Solvent Develop
The CPK Solvent processor can spin-spray solvents (acetone, Ipa) , water, and nitrogen onto substrates in a programmable process with variable spin speeds and chemical spray times. Several programs are stored to enable cleaning of substrates or developing of resists.
-
Headway Spin Coater
The CB-15 Headway spinner has a 15 inch bowl in a vented SS hood. The spinner is used to spin coat thin films of photoresist onto silicon wafers and photomasks.
-
Heidelberg DWL66 Laser Printer
A laser source pattern generator used for making photomasks. A resolution limit of 1.5 microns is reliably demonstrated in our facility.
-
HMDS
The YES 310 vacuum oven is used to coat substrates with HMDS to enhance resist adhesion to the substrates.
-
Karl Suss MA6B #1 Contact Printer
Karl Suss MA6 BA6 Contact Aligner/Printer: 1000 W broadband UV arc lamp produces 8 – 12 mW/cm2 intensity at the wafer. Resolution demonstrated to .5 micron spaces between geometries. Substrate size ranges from 5×5 mm to 150 mm (6 inch). We have mask/wafer hardware for 3, 4 and 6 in diameter substrates. System has automatic…
-
Karl Suss MA6B #2 Contact Printer
This is our newest contact printer, which takes the place of the Quintel. It was installed in the summer of 2019. It is equipped with a special sample holder for small Si chips/irregularly shaped samples, as well as full Si wafers. The user manual has detailed instructions on how to use the tool, how to…
-
MicroLight 3D Smart Print UV Maskless Lithography System
This new and innovative photolithography system arrived in the cleanroom in the summer of 2021, and it is located in Bay 5. It is available to users, and its capabilities are still being explored in process development.
-
Raith 150 Two E-Beam Lithography System
UTD received funding from the National Science Foundation for a high resolution electron beam lithography system as a result of a proposal written by Dr. Walter Hu, Dr. Lawerence Overzet and Dr. J. B. Lee for the purpose of providing researchers in the North Texas area capability for patterning nano-scale devices commensurate with the leading…
-
Solvent Trash Can Exhaust
Manual
-
TO03-TO07 Blue M Ovens
The Blue M ovens are used for resist process bake steps. Four ovens cover temperatures from 65 to 180 C.
-
Ultratech Mask Cleaner
An automated system that can clean multiple masks using detergent and high pressure DI water.
Thermal Processing
-
Jetfirst 200 Rapid Thermal Processor
The JetFirst 200 is a halogen lamp heated Rapid Thermal Process system that is capable of rapidly heating samples from ambient up to 1200 C. The object is provided with closed loop temperature control set by either a thermocouple or optical pyrometer. The reaction chamber can accommodate wafers up to 200 mm in diameter with…
-
Minibrute Atmospheric Furnaces
The four-stack Thermco MiniBrute atmospheric furnace system provides basic oxidation and annealing capabilities needed for electron device fabrication on wafers up to 100 mm in diameter. The system is presently configured to allow either O2, 10% O2 + 90% N2, N2, or forming gas to be delivered to tubes 2 and 3. The two bottom…
-
TR02/TR03 MPTC RTP – 600 Rapid Thermal Processor
The MPTC RTP-600 is a compact, single-wafer, desk-top rapid thermal process system that is capable of rapidly heating samples from ambient up to 1200 C. The object features an easily interchangeable quartz heating chamber with closed-loop temperature control and programmable Time-Temperature profiles. The reaction chamber is configured to hold 100 mm wafers. The UTD Cleanroom has…
-
TV01 Vacuum Oven
Coming soon.
-
Tystar Diffusion/Oxidation Furnaces
The four-stack Tystar atmospheric furnace system provides basic oxidation and annealing capabilities needed for silicon transistor and MEMS fabrication on wafers up to 150 mm in diameter. The system is presently configured with two oxidation tubes and two tubes for solid-source diffusion and annealing of N and P type dopants. The furnaces are fully computer-controlled…
Thin Film Deposition
-
ME02 Cryo-Evaporator E-beam Deposition
The Cryo evaporator is a tech built cryo pumped 8 kilowatt 4 pocket e-gun evaporator used for thin film metal deposition.
-
ME05 CHA E-Beam Evaporator
The CHA Mark 50 E-Beam Evaporator is a state-of-the-art tool designed for thin film deposition applications. With its advanced electron beam technology, and ease of use, it provides precise control over the deposition process, making it an essential piece of equipment for research and development in materials science, nanotechnology, and semiconductor fabrication.
-
ME06 Temescal E-Beam Deposition
Electron Beam Evaporation (or e-beam evaporation) is a powerful physical vapor deposition process that allows the user to evaporate materials that are difficult or even impossible to process using standard resistive thermal evaporation. The electron beam is accelerated to a high kinetic energy and focused toward the starting material. The kinetic energy of the electrons…
-
MS02 Hummer VI Sputter
The Hummer is a sputter system used to coat SEM samples with a thin film of Palladium Gold to reduce charging.
-
MS03 AJA 1500 Magnetron Sputter Deposition
The ATC 1500 sputter deposition system, by AJA International, has the capability to co-sputter conductive and insulating materials on substrates up to 100 mm in diameter. In addition to Ar sputtering, N2 and O2 are also available for use in reactive-ion sputtering. The UTD object is equipped with 2 RF and 2 DC magnetron sources…
-
MS04 AJA Orion Magnetron Sputter Deposition
The ATC Orion sputter deposition system, by AJA International, has the capability to co-sputter conductive and insulating materials on substrates up to 100 mm in diameter. In addition to Ar sputtering, N2 or O2 are also available for use in reactive-ion sputtering. The UTD object is equipped with 3 RF and 2 DC magnetron sources.…
Surface Chemistry (Wet Processing)
-
CD02 Avenger Basic Dual Chamber Spin Rinse Dryer
The Avenger Basic Spin Rinse Dryer is a dual chamber wafer washer system with 3” and 4” diameter substrate capabilities. The substrates are held in a standard Teflon wafer boat that is balanced along with the rotor frames by the manufacturer. This means that you can only spin your substrates using the designated boat or…
-
CD03 Tousimis Supercritical Dryer
The Tousimis Supercritical “Automegasamdri” Model 815B Series C Critical Point Drier (CPD) is a system for drying typically MEMS devices after sacrificial layer etch or samples with high aspect ratio photoresist features. If the HF etchant was rinsed with water and dried in atmosphere, the surface tension of the water could pull structures such as…
-
CO02 Samco UV Ozone Stripper/Cleaner
The Samco Deep UV cleaner is a system using 185 nM and 254 nM energy with Oxygen or Ozone to remove compounds from the surface of a substrate. This can result in an atomically clean surface. Typically, most of the compounds (photoresist, etchant masks) will be removed with a chemical stripper. The DUV cleaner is…
-
HA01 Acid Hood
The Acid Hood is designed for the safe handling and disposal of acidic liquids only. It is constructed of chemical and fire resistant white plastic with a 3 by 2.5 foot working surface. The hood features a temperature controlled hot plate, a deionized-water sink and faucet, DI water and nitrogen spray guns, and two process…
-
HB01 Base Hood
The Base Hood is designed for the safe use of basic liquids only. It is constructed of chemical and fire resistant white plastic with a 3 by 2.5 foot working surface. The hood features a temperature controlled hot plate, a deionized-water sink and faucet, DI water and nitrogen spray guns, and two process timers.
-
HR01 RCA Hood
The RCA Hood is designed for the safe handling and disposal of RCA silicon wafer cleanup solutions. It is constructed of chemical and fire resistant white plastic with a 5.5 by 2.6 foot working surface. The hood features four temperature controlled cleanup baths, two cascade rinse tanks, a deionized-water sink and faucet, DI water and…
-
HS01 General Solvent Hood
The General Solvent Hood is designed for the safe handling and disposal of organic solvents only. It is constructed of stainless steel with a 5 by 2.5 foot working surface. The hood features a temperature controlled hot plate, three solvent tanks, a solvent drain, a deionized-water sink and faucet, DI water and nitrogen spray guns,…
-
HS02 Solvent Hood
The Solvent Hood is designed for the safe handling and disposal of organic solvents only. It is constructed of stainless steel with a 3 by 2.5 foot working surface. The hood features a temperature controlled hot plate, a deionized-water sink and faucet, a solvent tank, an ultrasonic tank, DI water and nitrogen spray guns, and…